Enquiries about the products can be through our official channels using email, social media and chatbot.Solar Fountain Power Panel Water Pump Garden Pool Pond Outdoor Solar Panel Fountain Floating Garden Decoration Waterfall
1.The Brushless Motor Solar Fountain
Specification:
The Power of Solar Battery: 7V/1.5W
The Size of solar panel power: 155mm*105mm*90mm
The Power of Pump: 6V, 1.12 W
Max flow quantity of Pump: 180L/h
Max Lift of Pump: 100cm
Max water height: 30-60cm
Features:
The life Time: ≥1000Hours
Delay: ≤5s
Restart: if sunshine is off.can restart within 3 seconds when sunshine is back.
Installation:
1. Put the pump totally in the water with it’s nozzle over the water ,Be sure the pump is fixed firmly on the bottom of the fountain to avoid vibration.
2. Plug the jack of pump in the jack of solar panel output.
3. Put the solar panel under enough sunlight and be better to face directly to sun.
Caution:
1.Be sure to put enough water in the fountain,especially on sunny days;always keep the pump under the water surface.
2.Change water frequently to keep the water cleaning to avoid any dirt to impede the pump.
3.Be careful to protect the solar panel to avoid any damage.
4.Keep the surface of solar panel cleaning constanty.
Package Include:
1 X Solar Panel
7 X Nozzles
1 X Brushless Water Pump
1 X Install Fittings
1 X User Manual
2.Solar Powered Fountain
Installation:
1. Assembing the connecting pipe B1 with the pum outlet. and then with connecting pipe B2 and nozzles in turn.
2. Putting the product into water, making sure the water pump is completely immersed in water,Let the sunlight shine diectly on the solar panel without any shade so that the water pump can start spraying water.
Feature:
The Lifetime: ≥10000 Hours
Restart: The fountain pump will restart atomaticall in 3seconds once bright sunlight shines directly again on the solar panel without any shade.
Specification:
· Solar Panel: 7V/1.4W
· Size of Solar Panel: 160mm*3mm
· Maximum Lift of Pump: 70cm
· The Power of Pump: 0.5~0.85W
· Maximum Water Height: 30-55cm ·
· Maximum volume of Flow: 150L/h
3.Square water pump
Specification:
The Power of Solar Battery: 7V, 1.2W
The size of solar panel power: 110mm*110mm*25mm
The Power of Pump: 7V, 1.1W
Max flow quantity of pump: 160L/h
Max Lift of Pump: 100cm
Max water height: 30-60cm
Features:
The Life Time:≥1000Hous Delay : ≤5s .
Restart: if sunshine is off,can restart wthin 3seconds when sunshine is back.
Installation:
1. Put the pump totally in the water with it’s nozzle over the water; Be sure the pump is fxed firmly on the bottom of the fountain to avoid vibration.
2. Plug the jack of pump in the jack of solar panel output.
3. Put the solar panel under enough sunlight and be better to face directly to sun.
Caution:
1. Be sure to put enough water in the fountain,especily on sunny days,always keep the pump under the water surface.
2. Change water frequently to keep the water cleaning to avoid any dirt to impede the pump.
3. Be careful to protect the solar panel to avoid any damage.
4. Keep the surface of solar panel cleaning constanty.
Announcements:
1. Put the solar panel under enough sunlight and be beter to face directly to sun,The height of the water depends on the strength of the sun,When the sun is weak, water pump will not work continuously,but will automaticaly launch repeatedly,until the sun after reaching a certain intensity pump continuous work is resumed
2. The pump must be immersed in the water,not work long time dehydration.When pump just immersed in the water,because there is a air pump,Suggestions such as normal after water spray nozzle is inserted in the pump.
3. Please keep the water clean, regular cleaning water pump, to prevent foreign bodies caused by pump suction pump can’t work normally.
Reviews
There are no reviews yet.