Enquiries about the products can be through our official channels using email, social media and chatbot.
Product Features
1. Access Control keypad + Power supply + Smart Electric Door Lock + Exit button + 10pcs Keyfobs(180KG)
2. Suitable for wooden,metal and glass door, not need bracket, convenient to install.
3. Surface Waterproof and dustproof panel.The ABS flame-retardant casing is integrally formed. After the installation is completed, a layer of glass glue can be applied to the back cover to achieve a comprehensive waterproof effect. (not IP65 waterproof, can’t be used under the rain directly)
4. Support RFID Card, password, RFID Card+ password to open the door.Support 1000 card and password user capacity, can set card + password to open the door, the safety factor is higher.
5. Smart original chip.Large user capacity, fast identification, full-featured, stable operation and simple operation.
RFID KEYPAD
Product Description
Access Controller
User capacity: 1000
Card reading type: EM card
Card reading distance: 1-5CM
Identification method: card, password, card + password
Programming password: 123456
Unlocking time: 5 seconds
Open the door input: all the way to open the button input
Doorbell output: one way wired doorbell output
Can be connected to automatic door or gate
Working voltage: DC 12V ± 10%
Working power supply: <100mA
Working temperature: 0 ° C ~ 60 ° C
Size of A1: 113*70*20mm
RFID KEY
Surface Waterproof and Dustproof Panel
The ABS flame-retardant casing is integrally formed. After the installation is completed, a layer of glass glue can be applied to the back cover to achieve a comprehensive waterproof effect. (not IP65 waterproof, can’t be used under the rain directly)
RFID KEY
RFID KEY
Support RFID Card, Password, RFID Card+ Password to open the door
Support 1000 card and password user capacity, can set card + password to open the door, the safety factor is higher
RFID KEY
RFID KEY
Power Supply
Material: Steel
Output Power: 36W
Durability Test: 500000 times
Input Frequency: 50-60Hz
Input Voltage: 110-260VAC
Output Voltage: DC12V/3A
Working Temperature: -20 to +65
Time Delay: 0-15 seconds adjustable
Relative Humidity: 0%-90%
Dimension: 100*65*32mm
Output Power: 36W
Durability Test: 500000 times
Input Frequency: 50-60Hz
Input Voltage: 110-260VAC
Output Voltage: DC12V/3A
Working Temperature: -20 to +65
Time Delay: 0-15 seconds adjustable
Relative Humidity: 0%-90%
Dimension: 100*65*32mm
RFID KEY
Door Exit Button
Material:Hard Plastic
Maximum Power Rating:36V DC 3A—5A output
Support both NC Mode (Fail Safe Mode) &
NO Mode (Fail Secure Mode)
Dimension:86X86MM ( L / W )
RFID KEY
RFID Key fobs
RFID 125KHz frequency key card
Operating frequency: 125kHz
Detection range: 0-10cm
Each card pre-programmed and has a unique identity number on it.
Please Noted: There are 5 color of the RFID key fobs for optional (blue, red, yellow, green, black). We will send mix color by default. If you need single color, please leave message to us.
Operating frequency: 125kHz
Detection range: 0-10cm
Each card pre-programmed and has a unique identity number on it.
Please Noted: There are 5 color of the RFID key fobs for optional (blue, red, yellow, green, black). We will send mix color by default. If you need single color, please leave message to us.
RFID KEY
RFID KEY
Kits Details
Kit3: Suitable for wooden door, metal door. convenient and beautiful. No need bracket
Package including: Access Control keypad + Power supply + NC type Electric Strike lock + Exit button + 10pcs Key fobs
(We will send the NC type by default, if you want NO type, please leave us a message.)
Working Voltage: 12V ± 10%
Current: 200mA – 450mA
Holding Force: 500kg
Surface Temperature: Lower than room temperature +20
Working Temperature: -30-+60 Degrees Celsius
Operating Humidity: 0~90%(non-condensing)
Feature：Fail secure (NO), Fail safe(NC)
Material: Stainless steel
NC type strike lock: Locked when power on, unlocked when power off
NO type strike lock: Locked when power off, unlocked when power on
Size: 150 x 28 × 34mm（L / W / H）
Current: 200mA – 450mA
Holding Force: 500kg
Surface Temperature: Lower than room temperature +20
Working Temperature: -30-+60 Degrees Celsius
Operating Humidity: 0~90%(non-condensing)
Feature：Fail secure (NO), Fail safe(NC)
Material: Stainless steel
NC type strike lock: Locked when power on, unlocked when power off
NO type strike lock: Locked when power off, unlocked when power on
Size: 150 x 28 × 34mm（L / W / H）
RFID KEY
RFID KEY
Kit4: Suitable for wooden, metal and Stainless steel door. No need bracket.
Package including: Access Control keypad + Power supply + Electric Drop bolt lock + Exit button + 10pcs Key fobs
Working voltage: 12V
Time delay: 0s,3s,6s adjustable
Working current: Start state 1.2A ; Persistent state 120mA
Coil type: Continuous working
Security type: Electric power lock, unlock
Lock core: The diameter of 12.5MM stainless core, extending the length of 15MM
Locking mode: Magnetic induction
Unlock Mode: Fail Safe (Locked when power on, unlocked when power off)
Dimension: 150X34X28( L / W / H )
Working current: Start state 1.2A ; Persistent state 120mA
Coil type: Continuous working
Security type: Electric power lock, unlock
Lock core: The diameter of 12.5MM stainless core, extending the length of 15MM
Locking mode: Magnetic induction
Unlock Mode: Fail Safe (Locked when power on, unlocked when power off)
Dimension: 150X34X28( L / W / H )
RFID KEY
RFID KEY
Kit5: Suitable for wooden, metal and glass frame door. No need bracket.
Package including: Access Control keypad + Power supply + 180KG (380lbs) Electric Magnetic Lock + Exit button + 10pcs Key fobs
Material: Aluminum alloy shell + iron plate
Holding force: 180KG (380lbs)
Working Voltage: DC12V
Working Current: 380-430mA
Humidity: 0 to 95%
Working Temperature: -10 to 55 degrees Celsius
Working mode: power-on to lock, power-off to unlock
Waterproof: Yes. Can be installed outside .
Holding force: 180KG (380lbs)
Working Voltage: DC12V
Working Current: 380-430mA
Humidity: 0 to 95%
Working Temperature: -10 to 55 degrees Celsius
Working mode: power-on to lock, power-off to unlock
Waterproof: Yes. Can be installed outside .
RFID KEY
RFID KEY
Kit6: Suitable for frameless glass door. Need U bracket.
Package including: Access Control keypad +Power supply +180KG (380lbs) Magnetic Lock +U bracket +Exit button +10pcs Key fobs
If your door is frameless glass door, then will need a U bracket
Size of U Bracket: 130* 33 * 26mm (L/W/H)
RFID KEY
RFID KEY
Kit7: Suitable for wooden, metal door. Need L bracket.
Package including: Access Control keypad +Power supply +180KG (380lbs) Magnetic Lock +L bracket +Exit button +10pcs Key fobs
Look at the door from the indoor, if the door is flat or the door to door frame is less than 3cm, you need to add the L bracket.
Size of L Bracket: 170* 34 * 25mm (L/W/H)
RFID KEY
RFID KEY
Kit8: Suitable for wooden, metal, glass door. Need ZL bracket.
Package including: Access Control keypad +Power supply +180KG(380lbs) Magnetic Lock +ZL bracket +Exit button +10pcs Key fobs
If your door is open from indoor, then need to add the ZL bracket.
Size of L Bracket: 170*34*25mm (L/W/H) ,
Size of Z Bracket: 138*45*45mm (L/W/H)
RFID KEY
RFID KEY
Kit9: Suitable for wooden, metal and glass frame door. No need bracket.
Package including: Access Control keypad + Power supply + Embedded 180KG(380lbs) Electric Magnetic Lock + Exit button + 10pcs Key fobs
Size of the Lock: 192Lx33Wx20H(mm)
Size of Armature Plate: 139Lx32x11H(mm)
Holding Force: 180kg(350Lbs)
Input Voltage: 12VDC
Current: 12V/120mA
Size of Armature Plate: 139Lx32x11H(mm)
Holding Force: 180kg(350Lbs)
Input Voltage: 12VDC
Current: 12V/120mA
RFID KEY
Wiring Diagram
Reviews
There are no reviews yet.